Guernsey, Jersey, United Kingdom, Ireland, Belgium, Netherlands, Luxembourg, Norway, France, Germany, Spain, Austria, Denmark, Portugal, Italy, Slovakia, Sweden, Estonia, Slovenia, Hungary, Czech Republic, Finland, Poland, Lithuania, Bulgaria, Latvia, Romania, Croatia, Greece
Replacement rubber shockmount for an Eames Herman Miller & Vitra Lounge Chair & Ottoman. Conforms to all correct sizes and material.
Lounge Chair Shockmounts are larger than standard fiber chairs and are made from the original rubber compound for the most authentic replacement part.
We recommend using the epoxy glue 'original weld' by JB Weld for the best possible adherence of these mounts to wooden chairs. This glue is available to buy alongside our shockmounts.
The shock mount measures 115mm in length x 45mm in width x 12mm in depth. The distance between the two holes is 70mm.
1 - Clean and sand area of original shock mount in preparation
2 - Gently sand back of new shock mount to make slightly abrasive
3 - Clean back of new shock mount and area of application with acetone or white spirit.
4 - Mix and apply an epoxy glue (JB Weld is one such brand) to the shockmount
5 - Put shock mount into place and use a clamp for at least 24 hours
Shock mounts do include new black screws with them to ensure perfect usability.
We do not take responsibility for any failed fitments. We would always suggest using professionals to fit them.