IMAGE 29/54

Zoom

Close X
< PREVIOUS
Herman Miller Technical Manual 1970 – Page 6.7 is a checklist for a field check engineer whilst overviewing the arena for Eames Educational Seating installs
NEXT >

Page 6.7 (EES Checklist)

 

Gallery Images

Click an image to view in high resolution

Herman Miller Technical Manual 1970 – The cover page of this binder book is a red plastic file with the whimsical title printed in simple white lettering in the center

Binder Cover
Herman Miller Technical Manual 1970 – The inner page of the manual lists the departments and key personnel for contact within the customer service teams

Service Directory
Herman Miller Technical Manual 1970 – The contents page comes with a typed list including parts prices, tables, seating and other misc gems of information

Contents Page
Herman Miller Technical Manual 1970 – Page 1.0 notes the the section for parts prices and action office parts prices – a rare glimpse into company info

Page 1.0 (Parts Section Contents)
Herman Miller Technical Manual 1970 – Page 1.1 begins with a really interesting price list for the Gun Stock oil used on the Eames Lounge Chair & Ottoman

Page 1.1 (Gunstock Oil)
Herman Miller Technical Manual 1970 – Page 1.2 lists some Eames parts such as dome feet for DCM, DTM and LCM and glides for DSS, Tandem Seats among others

Page 1.2 (Castors & Glides)
Herman Miller Technical Manual 1970 – Page 1.3 is interesting in offering replacement seat and back panels for plywood DCM & LCM in Rosewood, Walnut & Ash

Page 1.3 (DCM & DTM Parts)
Herman Miller Technical Manual 1970 – Page 1.4 has an interesting array of parts like LCM panels, Alu Group Arms and full complete bases for plastic chairs

Page 1.4 (LCM Parts & Complete Bases)
Herman Miller Technical Manual 1970 – Page 1.5 contains a list of tubular frames for seating including that of the DCM, LCM and La Fonda 1700 chairs

Page 1.5 (Tubular Seating Bases)
Herman Miller Technical Manual 1970 – Page 1.6 contains singular parts used for the Eames Segmented table series including columns and bases

Page 1.6 (Table Base Parts)
Herman Miller Technical Manual 1970 – Page 1.7 has a fabulous selection of Rosewood Eames Lounge chair & Ottoman panels & leather cushions too

Page 1.7 (Eames Lounge Chair Parts)
Herman Miller Technical Manual 1970 – Page 1.8 has more Eames Lounge Chair parts along with recover costs for Aluminum Group in various finishes

Page 1.8 (Aluminum Group Parts)
Herman Miller Technical Manual 1970 – Page 1.9 has various intricate parts available for replacement on the George Nelson Action office range

Page 1.9 (Screws & Clips)
Herman Miller Technical Manual 1970 – Page 2.0 lists the contents for the Maintenance section which covers a wide range of finish care options

Page 2.0 (Maintenance Section Contents)
Herman Miller Technical Manual 1970 – Page 2.1 has the remarkable care instructions for Eames Lounge Chair & Ottoman wood finishes using Gun Stock Oil

Page 2.1 (Gunstock Oil Finish Care)
Herman Miller Technical Manual 1970 – Page 2.2 details instructions for the care of table top surface such as laminate, marble and granites too

Page 2.2 (Laminate & Stone Care)
Herman Miller Technical Manual 1970 – Page 2.3 details the cleaning procedures for the Eames fiberglass shell chairs using mild detergents and water

Page 2.3 (Shell Chair Cleaning)
Herman Miller Technical Manual 1970 – Page 2.4 has care and maintenance for all types of fabrics including that using scotchguard, a well known 3M product

Page 2.4 (Fabric Care)
Herman Miller Technical Manual 1970 – Page 2.5 gives instructions for long term care of Aluminum products using Simoniz One Step Cleaner Wax

Page 2.5 (Aluminum Care)
Herman Miller Technical Manual 1970 – Page 2.6 has a useful tip for maintaining the finish of the Melamine as found on the Eames DCM and LCM plywood chairs

Page 2.6 (DCM/LCM Melamine Care)
Herman Miller Technical Manual 1970 – Page 2.7 has tips for the long term care of Genuine Leather, Rosewood (for Lounge Chairs) & Stainless Steel too

Page 2.7 (Leather & Rosewood Care)
Herman Miller Technical Manual 1970 – Page 6.0 is the contents page for the section titled EES which serves as in-depth diagrammatic references for designs

Page 6.0 (Section Contents)
Herman Miller Technical Manual 1970 – Page 6.1 for Eames Educational seating installations, are diagrams to help with clearances/installs in situ

Page 6.1 (EES-1 With Arms)
Herman Miller Technical Manual 1970 – Page 6.2 for Eames Educational seating are for fiberglass model installs without arms and tablets included

Page 6.2 (EES-3 No Arms)
Herman Miller Technical Manual 1970 – Page 6.3 for EES model 5 which is the version with built in tablet arms with the fiberglass chair seats

Page 6.3 (EES-5 Tablet Inc)
Herman Miller Technical Manual 1970 – Page 6.4 for EES is model 6 which has a tablet fitted in a fixed and unmovable position, includes all diagrams

Page 6.4 (EES-6 Fixed Tablet)
Herman Miller Technical Manual 1970 – Page 6.5 is dedicated to model EES-7 which has the higher and fixed arm rest with a smaller profile

Page 6.5 (EES-7 Fixed Small Arm)
Herman Miller Technical Manual 1970 – Page 6.6 has an all important guide to checking the room before installation of the Eames Educational Seating system

Page 6.6 (EES Room Guide)
Herman Miller Technical Manual 1970 – Page 6.7 is a checklist for a field check engineer whilst overviewing the arena for Eames Educational Seating installs

Page 6.7 (EES Checklist)
Herman Miller Technical Manual 1970 – Page 6.8 is a continuation of the engineer checklist for a room review of Eames EES installations

Page 6.8 (EES Checklist cont)
Herman Miller Technical Manual 1970 – Page 6.9 is a complete list of all part numbers and componentry for the Eames Educational Seating setup

Page 6.9 (EES Component Setup)
Herman Miller Technical Manual 1970 – Page 6.10 is a continuation list of components and their respective part numbers for the Eames EES install system

Page 6.10 (EES Component List)
Herman Miller Technical Manual 1970 – Page 7.0 is a contents page detailing the section dedicated to Eames Table designs and their componentry

Page 7.0 (Tables Section Contents)
Herman Miller Technical Manual 1970 – Page 7.1 uses illustrations & a grid to show all model numbers & corresponding dimensions for Eames Segmented tables

Page 7.1 (Eames Segmented Tables)
Herman Miller Technical Manual 1970 – Page 7.2 is dedicated to Eames oval shaped Segmented Tables with illustrations & dimensions table in easy read format

Page 7.2 (Oval Eames Segmented Tables)
Herman Miller Technical Manual 1970 – Page 7.3 again uses icon illustrations and a grid to show all the models of the rectangular Eames Segmented tables

Page 7.3 (Rectangular Segmented Tables)
Herman Miller Technical Manual 1970 – Page 8.0 is the section title page dedicated to the Eames MBP fixed position counter and bar stools

Page 8.0 (Eames MBP Stools)
Herman Miller Technical Manual 1970 – Page 8.1 is a complete engineer guide for installation of Eames MBP counter stools with dimension & clearance details

Page 8.1 (Eames MBP Installation)
Herman Miller Technical Manual 1970 – Page 8.2 is the engineer guide for MBP continuous tables that are installed along with the Eames corresponding stools

Page 8.2 (MBP Tables)
Herman Miller Technical Manual 1970 – Page 9.0 is the section title page for the Maintenance files for the Eames Fiberglass Shell Chairs in all their forms

Page 9.0 (Eames Shell Chair Section)
Herman Miller Technical Manual 1970 – Page 9.1 has written and illustrative guide to the correct hardware to be used to attach Eames Fiberglass chair bases

Page 9.1 (Shell Chair Hardware)
Herman Miller Technical Manual 1970 – Page 9.2 has a diagram and written information on all hardware used with upholstered Eames fiberglass chairs

Page 9.2 (Upholstered Shell Chair Hardware)
Herman Miller Technical Manual 1970 – Page 10.0 has the contents title page for the section dealing with anchoring methods for various Eames installations

Page 10.0 (Anchoring Methods Section)
Herman Miller Technical Manual 1970 – Page 10.1 gives instructions for semi-permanent anchoring of the Eames Tandem Bench Sling Seating system

Page 10.1 (Tandem Bench Anchoring)
Herman Miller Technical Manual 1970 – Page 10.2 has illustration and instruction for shell chair Tandem Bench permanent installation anchoring

Page 10.2 (Tandem Bench Permanent Anchoring)
Herman Miller Technical Manual 1970 – Page 10.3 has in-depth instructional diagrams for permanent anchoring for the EES (Eames Education Seating)

Page 10.3 (EES Anchoring)
Herman Miller Technical Manual 1970 – Page 10.4 has super detailed instruction for the permanent anchoring of the Eames MBP counter stools and tables system

Page 10.4 (MBP Anchoring)
Herman Miller Technical Manual 1970 – Page 11.0 is the index page for miscellaneous care and maintenance guides of various Eames designs

Page 11.0 (Misc Section Contents)
Herman Miller Technical Manual 1970 – Page 11.1 is the super interesting official field guide for replacing Eames fiberglass shell chair shockmounts

Page 11.1 (Shell Chair Shockmount Repair)
Herman Miller Technical Manual 1970 – Page 11.2 gives details on how to replace locks on Action Office and potentially CSS cabinet & desk units

Page 11.2 (Lock Replacement)
Herman Miller Technical Manual 1970 – Page 11.3 is dedicated to special hardware for the permanent ganging together of Eames DSS stacking side chairs

Page 11.3 (DSS Chair Ganging)
Herman Miller Technical Manual 1970 – Page 11.4 uses text and illustration as a guide for button replacement for the Eames Lounge Chair & Ottoman cushions

Page 11.4 (Eames Lounge Chair Button Replacement)
Herman Miller Technical Manual 1970 – Page 11.5 is a step by step guide to the complete assembly of the Eames Tandem Bench with shell chairs attached

Page 11.5 (Tandem Bench Assembly)
Herman Miller Technical Manual 1970 – The rear side of the binder continues the bright red design of the front and has no printed text or writing on it

Rear Closed Cover